Evercoat Lite Weight OPTEX Non-Clog, Colour Changing Filler/Nikki/ Bog 3lt With Hardener

Description Evercoat Lite Weight OPTEX Non-Clog, Colour Changing Filler/Nikki/ Bog 3lt  LITE WEIGHT® OPTEX® is a smooth spreading, high quality, clog free, lite weight body filler formulated with patented OPTEX Color-Changing Technology. There’s no second guessing; once mixed with cream hardener, Lite Weight OPTEX changes from pink to green indicating the repair is ready to sand.   APPROVED SUBSTRATES:   Cold Rolled Steel       Aluminum SMC  Galvanized Steel Fiberglass      PREPARATION:     Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent.  Surface must be thoroughly dry before repairing or applying material.   Keep the repair area small. Use 80 grit to remove the paint and featheredge.   MIXING:    Stir the filler before using. Knead the cream hardener.    Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle).  Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved.    APPLICATION:    Apply in layers with even firm pressure.  Do not apply all at once.   The repair will gradually change colors from light pink to a light grey-green, indicating the repair is dry and ready to sand.   FINISH:   Rough shape with 80 grit  Sand filler with 80 grit or finer.  Final sand repair and paint edge 180 grit.  For best results, apply a premium Evercoat polyester putty to provide a smoother finish and reduce the amount of primer surfacer needed for a quality finish.      NOTE:    Properties are typical values and should not be considered as sales specifications.     Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted.