HB 496 High Gloss HS 2K Clear Coat Paint Aerosol 400ml x 3

Description 2K High Gloss HS Clear Coat Paint C496 Aerosol 400mL Touch Up Top Coat x 3   Includes:  x3 HB 2K 496 Aerosol A crystal clear, high gloss coat with excellent leveling. Fast hardening, suitable for all top quality refinishes. Ensures durable gloss and offers excellent resistance to extreme weather conditions. This item has a 2K Converter (Aerosol Additive) which is an additive used with 2K paints to accelerate through curing. This is a 2K clear coat lacquer for use with local repairs on paintwork. The special formulation has a component which activates the 2k lacquer on contact with air. This allows it be used straight from the can. VOC compliant with the regulations Easy to use Excellent results Easy to blend in No hardener required Ideal for spot repairs and isolated panel paintings General Technical Description  2-3 Passes Dust free 10min at 23’C Surface Body Basecoat Any waterborne system Pretreatment / Cleaning of substrate Clean substrate using a soft cloth and degreaser. Make sure the surface is air dried rather than wiped dry. Make sure you always use appropriate face protection and good ventilation. Product Application: Allow 30 mins after basecoat color has been applied to apply the clear coat. Apply two to three wet coats waiting 5-10 mins in between coats. Each coat should look wet and glossy but not to a dripping state. In case of slight dirt or dust imbedded in the clear coat you can lightly wet sand using P1500 grit paper. Finally use a polishing compounds to bring out the gloss. Be careful not to wax for the next 30 days. Shake thoroughly well before using Shake for 2-3 min after agitator ball has started to rattle. Dust free 10 min at 23°C After preparing the area to be painted ensure it to be free from dirt, wax, oil etc. Test on a similar surface using a back and forth action. 2-3 coats approximately 30-50 microns Spray at a distance of 25 cm thinly applied coats build up at 3-5 minutes intervals will achieve best results. Full hardness within 24 hours. Leave for 24 hours to harden. Flash Point: -97°C Specific Gravity: 0.67 g/cm3, covers 1 square meter per aerosol canister when applying two coats. Solid Content (No thinner): 14% Weight VOC (2004/42/EC) This product is an aerosol product based on its ingredients and its properties. The maximum VOC content in this category is 840 g/L. The VOC content in the ready for use form of this product is 655g/L. 2004/42/IIB(e)(840)655 Theoretical Coverage: – Cleaning of equipment: Please note: This aerosol does not have a hardener activation button/clip on the bottom of the can. It is a 2K air dry which activates when sprayed out of the can.   For more information in relation to the product view the Technical Data Sheet below- https://hbbody.com/en/product/c496-2k-hs-clear/